| The name of created object | Name of the object created in the Pma object tree.
The maximum name length is 30 characters. This is a system name, so it must contain only alphanumeric and must not contain any diacritics (i.e. national dependent characters), empty string, spaces and first character must not be a number. Default: "CommFinder" |
|---|---|
| Communication type |
Serial communication |
| Network address | Network address of the remote device (e.g. of the PLC device), to which the communication will be connected.
The address can be entered as: - IPv4 full address (e.g. "192.168.0.15")
- IPv4 address of this computer (i.e. "127.0.0.1")
- IPv4 computer name (e.g. "server11")
- IPv4 name of this computer (i.e. "localhost")
- IPv6 full address (e.g. "2a02:c38:8136:800a:37a:ab66:6fc9:accd")
- IPv6 address of this computer (i.e. "::1")
Macro expression can be used for input (it is evaluated after the application is launched). After the preconfiguration is created, the "PmaComm > Setting the parameters of the Ethernet-client > Network address" configurator will be set to this value. |
| Serial port | Selection of the communication serial port.
The value can be change by the OpenPort method. The value can be detected by method GetProtParam("SerPort"). After the preconfiguration is created, the "PmaComm > Setting the parameters of the serial link > Serial port" configurator will be set to this value. Not set - The object is not connected to any port after the application is launched and the serial port can be selected dynamically by the algorithm (by the PmaComm.OpenPort method).
COM1, COM2,..,COM66 - The specified serial port is opened after the application is launched. This port must be correctly configured and accessible in Windows OS (no one can use it).
For serial link each PmaComm object must have defined another communication port. For example, if one PmaComm object communicates through COM1, then next PmaComm object can communicate for example through COM2 (COM3, …) but it mustn't communicate through COM1. |
| Baud rate | Selection of the baud rate (bps, bit per second).
This configurator sets the initial value of the BaudRate property. After the preconfiguration is created, the "PmaComm > Setting the parameters of the serial link > Baud rate" configurator will be set to this value. 110
300
600
1200
2400
4800
9600
14400
19200
38400
57600
115200
128000
256000 |
| Parity | Parity selection. Appropriate value for the device, which it is communicated with, must be selected.
This configurator sets the initial value of the Parity property. After the preconfiguration is created, the "PmaComm > Setting the parameters of the serial link > Parity" configurator will be set to this value. |
| Default device address | The device address in the Modbus network.
After the preconfiguration is created, the "PmaCommGroup > Parameters > Special Parameters > Default device address" configurator will be set to this value. |
| Communication refresh rate [ms] | The period in milliseconds to be used for reading the current data by the PROMOTIC application.
After the preconfiguration is created, the "PmaCommGroup > Parameters > Communication refresh rate [ms]" configurator will be set to this value. |
| Panel title | Displayed in the panel header |